240W rms Music System Package 12 x 20W rms Pendant Speakers + 100M Cable
Order Code 300.104UK
EAN Barcode 5015972227329
Model Number 12*PS50W+RM240S
Inbuilt Bluetooth Receiver, USB/SD mp3 player & FM tuner --- Phantom power for optional paging mic (952.352UK or 952.353UK) --- Add a safety cable in areas where speakers could pose a danger if dropped --- 100m black speaker cable supplied (804.326UK or 801.818UK also available separately) --- Note: use terminal block to extend speaker cable. Do not short + and - together --- Amplifier, cable and speakers packed separately --- PS50 or PS65 pendant speakers (952.426UK, 952.427UK, 952.429UK, 952.430UK) --- RM-series 5 input 100V mixer-amp (953.213UK, 953.214UK, 953.215UK, 953.216UK)
High ceiling 100V pendant speaker packages have all the necessary components to build a PA system to cover areas with high, vaulted or suspended open lattice ceilings. Adastra pendant speakers have a spherical "infinite baffle" housing to develop a balanced, punchy sound with a wide dispersion for the best possible area coverage. A hard-wired 4.5m cable means that suspending the pendant speakers from a high level can bring the speaker closer to listening height, avoiding unwanted reverberation. As an approximate guide, allow around 5m spacing between 10W or 20W speakers at 3m height and use 30W models if the speaker plane is higher (up to 5m). RM-series mixer-amps have a Bluetooth receiver, mp3, FM tuner and are specified in each package based on the maximum speaker Wattage tappings. It is recommended to tap down the power of some perimeter speakers so that the total combined speaker Watts is <90% the amplifier max output power. Using lower tappings on more speakers can allow additional speakers to be added to the line, again observing the <90% rule.