| | | RS-series 100V slave-amplifier (953.120UK, 953.121UK, 953.122UK, 953.123UK) --- 100m speaker cable supplied (804.311UK or 801.817UK also available separately) --- 0.5m twin RCA link lead from mixer/amp output included (190.052UK) --- Note: use terminal block to extend speaker cable. Do not short + and - together --- Amplifier, cables and speakers packed separately --- BC-series speakers include wall bracket (952.714UK, 952.715UK, 952.716UK, 952.717UK)
Add-on commercial 100V indoor wall speaker packages are designed to enable the installer to extend an existing sound system for larger areas or additional zones. RS-series slave amplifiers offer the same power output of RM-series mixer-amps without duplicating any of the mixing or playback features. A signal lead is provided in each package for linking the Line Out from an existing RM mixer-amp to to the Slave In of the RS series slave amp. Alternatively, any add-on package could also be used as a standalone system in conjunction with an Adastra rack-mount mixer or zone matrix. As a rough approximation, allow 50W per 10m² in reasonably quiet areas up to 200W per 10m² for louder ambient areas. It is recommended to tap down the power of some speakers so that the total combined speaker Watts is <90% the amplifier max output power. Using lower tappings on more speakers can allow additional speakers to be added to the line, again observing the <90% rule. |
| | |
