| | Inbuilt Bluetooth Receiver, USB/SD mp3 player & FM tuner --- Phantom power for optional paging mic (952.352UK or 952.353UK) --- 100m speaker cable supplied (804.311UK or 801.817UK also available separately) --- Note: use terminal block to extend speaker cable. Do not short + and - together --- Amplifier, cable and speakers packed separately --- RM-series 5 input 100V mixer-amp (953.214UK, 953.215UK, 953.216UK) --- BC-series speakers include wall bracket (952.714UK, 952.715UK, 952.716UK, 952.717UK)
Commercial 100V indoor wall speaker packages are complete kits for music, announcements and voice alerts in busy environments and medium-large public indoor areas. Use higher power for larger areas or louder environments and extend using add-on packages if more speakers are needed. Ideally installed evenly spaced around the perimeter of a room, each speaker is supplied with a wall bracket that can be aimed for best coverage. As a rough approximation, allow 50W per 10m² in reasonably quiet areas up to 200W per 10m² for louder ambient areas. RM-series mixer-amps have a Bluetooth receiver, USB/SD player and FM tuner are specified here to the maximum speaker Wattage tappings. More speakers may be used on the specified amplifier if the combined Wattage tapping of all speakers is below the amplifier power rating. It is recommended to tap down the power of some speakers so that the total combined speaker Watts is <90% the amplifier max output power. Using lower tappings on more speakers can allow additional speakers to be added to the line, again observing the <90% rule. |
| | |