 | | | 90W rms Outdoor Music PA System
20W rms 4" Black Speaker | | |
| | | 
Order Code
953.179UK
EAN Barcode
5015972216606
Model Number
UM90
 |  | |
|
| | |
| | |
Order Code
952.964UK
EAN Barcode
5015972056691
Model Number
FC4V-B |  | |
|
| | |
| | | PUT TOGETHER YOUR PERFECT SYSTEM
Just add cable (see bottom of this page) and these packages provide everything you need for a complete, EASY FIT install
The amplifier will take different input sources which can include microphones, CDs, radios, phones and mp3 players
On the front of the amplifier there is a Bluetooth media player. You have the option of plugging in a flash drive or SD card containing your mp3 music files or switching to FM radio
Adastra manufacture professional Public Address systems using 100-Volt Line technology. With 100-Volt Line there is no need to balance speaker impedances to match the amplifier. No complicated calculations! No risk of overloading or blowing up the amplifier!
You simply wire the first speaker (COM and 100V terminals) to the amplifier (COM and 100V terminals) and then take the wire on to the next speaker until all are connected. Plug in to the mains and you are ready to go |
| | |
| | | 90W RMS 3-CHANNEL 100V LINE MIXER AMPLIFIER
Model - UM90
EAN - 5015972216606
100V mixer-amplifiers with USB audio player, FM tuner and BT wireless receiver in an ultra compact housing. Microphone input, line input and USB/FM/BT sections are governed by front panel volume controls and a master volume. Mono output to either 100V line or 8 Ohms speaker load is connected via screw terminals on the rear panel. Supplied with hardware for mounting 2 units side by side in a 1U 19" rack space. Designed as a versatile solution for small to medium PA installations.
Ultra compact form factor --- Efficient class D amplifier design --- Internal USB/FM/BT audio player --- 100V line or 8 Ohms operation |
| | |
| | | | Output power : rms | 90W (80W @ 24Vdc power) | | Alarm output | Fog, siren & alert generator |
|---|
| Dimensions | 300 x 210 x 44mm |
|---|
| Weight | 3.02kg |
|---|
| Power supply | 170-264Vac, 50Hz (IEC) or 24Vdc |
|---|
| Amplifier : construction | Class D + transformer output |
|---|
| Audio source | Internal USB/FM/BT player |
|---|
| Inputs | 1 x mic (6.3mm), 1 x line (2 x RCA), 1 x aux (3.5mm) |
|---|
| Line output | 2 x RCA (mono) |
|---|
| Speaker outputs | Screw terminals - 100V / 8 Ohms / Com |
|---|
| DC power | 24Vdc screw terminals |
|---|
| Mute | 24V relay contacts |
|---|
| THD | <0.4% @ 1kHz |
|---|
| Input impedance | 1k Ohms (mic/line) |
|---|
| Input sensitivity | -10dB (line), -45dB (mic) |
|---|
| SNR | 80dB (line), 75dB (mic) |
|---|
| Frequency response | 100Hz - 18kHz |
|---|
| |
| | | 4" 20W RMS OUTDOOR SPEAKERS
Model - FC4V-B
EAN - 5015972056691
2-way compact speakers with weatherproof moulded cabinets, making them ideal for gardens, outdoor shelters, health club spa areas and marine applications.
2-way speaker system with crossover network --- Weatherproof IP44 --- UV protected ASTM D4329 --- Equalisation switch boosts higher frequencies when outside --- Gold plated spring terminal connections --- Mounting bracket included --- Available in white or black finish --- Supplied singly --- Rotary selector switch for 100V line tappings or 8 ohms operation --- Optional mounting by M6 screw sockets |
| | |
| | | | Woofer | 9cm (3.5") PP cone | | Power handling : max. | 80W |
|---|
| Power handling : rms | 40W |
|---|
| Colour | Black |
|---|
| Frequency response | 114Hz - 20kHz |
|---|
| SPL @ 1W/1m | 87dB |
|---|
| Tappings | 2.5/5/10/20W + 8 Ohms |
|---|
| Dimensions | 199 x 149 x 112mm |
|---|
| Weight | 1.36kg |
|---|
| Tweeter | 13mm PEI dome tweeter |
|---|
| IP rating | IP44 |
|---|
| Dispersion angle | 145° |
|---|
| |
| | | RECOMMENDED SPEAKER CABLE - Click on red order code to veiw
807.057 (white) and 807.058 (black) Figure 8 Speaker Cable - 2 x (42 x 0.2mm 1.32mm²) 15A - This cable will allow 240W to travel 175M without any loss
807.090 and 807.095 Hi Flex Double Insulated 0.75mm² 6A Speaker Cable - 2 x (12 x 0.2mm² Cu + 12 x 0.2mm² CCA) 6A Black - This cable will allow 240W to travel 100M without any loss
801.817 and 801.818 Double Insulated 1.15mm² Speaker Cable - 2 x (25 x 0.18mm² Cu + 20 x 0.18mm² CCA) 15A Black - This cable will allow 240W to travel 150M without any loss
801.878 and 801.879 Double Insulated 2.01mm² Speaker Cable - 2 x (40 x 0.18mm² Cu + 39 x 0.18mm² CCA) 25A Black - This cable will allow 240W to travel 250M without any loss
For most installations 807.057 or 807.058 is sufficient, giving the best quality cable for the price. However, if you are running the cable anywhere where it is not secure or where it can be touched by someone, then use the double insulated cable |
| | |
| | Copyright © 1997 - 2023 Adastra PA Providing dependable Online Sales for over 25 years | |
 |
|
|