Home Page    Current Products
About Us     Shopping Cart     
  90W rms Easy Fit Outdoor Music PA System
20W rms 6" White Speaker
Adastra UM90/WSP25-W 90W rms Easy Fit Outdoor Music PA System 20W rms 6Adastra UM90/WSP25-W 90W rms Easy Fit Outdoor Music PA System 20W rms 6
adastraOrder Code
 In stock - available for next day deliverySimilar Products
1 Speaker + Amplifier<img alt=
£164.17 + VAT
2 Speakers + Amplifier<img alt=
£190.00 + VAT
3 Speakers + Amplifier<img alt=
£216.67 + VAT
4 Speakers + Amplifier<img alt=
£229.17 + VAT
5 Speakers + Amplifier<img alt=
£251.67 + VAT
6 Speakers + Amplifier<img alt=
£275.00 + VAT
7 Speakers + Amplifier<img alt=
£297.50 + VAT
8 Speakers + Amplifier<img alt=
£320.83 + VAT
9 Speakers + Amplifier<img alt=
£343.33 + VAT
10 Speakers + Amplifier<img alt=
£366.67 + VAT
11 Speakers + Amplifier<img alt=
£389.17 + VAT
12 Speakers + Amplifier<img alt=
£411.67 + VAT

Just add cable (see bottom of this page) and these packages provide everything you need for a complete, EASY FIT install

The amplifier will take different input sources which can include microphones, CDs, radios, phones and mp3 players

On the front of the amplifier there is a media player. You have the option of plugging in a flash drive or SD card containing your mp3 music files or switching to FM radio

Adastra manufacture professional Public Address systems using 100-Volt Line technology. With 100-Volt Line there is no need to balance speaker impedances to match the amplifier. No complicated calculations! No risk of overloading or blowing up the amplifier!

You simply wire the first speaker (COM and 100V terminals) to the amplifier (COM and 100V terminals) and then take the wire on to the next speaker until all are connected. Plug in to the mains and you are ready to go
Model - UM90
EAN - 5015972216606

View User Manual

100V mixer-amplifiers with USB audio player, FM tuner and BT wireless receiver in an ultra compact housing. Microphone input, line input and USB/FM/BT sections are governed by front panel volume controls and a master volume. Mono output to either 100V line or 8 Ohms speaker load is connected via screw terminals on the rear panel. Supplied with hardware for mounting 2 units side by side in a 1U 19" rack space. Designed as a versatile solution for small to medium PA installations.

Ultra compact form factor --- Efficient class D amplifier design --- Internal USB/FM/BT audio player --- 100V line or 8 Ohms operation
Output power : rms90W (80W @ 24Vdc power)
Alarm outputFog, siren & alert generator
Dimensions300 x 210 x 44mm
Power supply170-264Vac, 50Hz (IEC) or 24Vdc
Amplifier : constructionClass D + transformer output
Audio sourceInternal USB/FM/BT player
Inputs1 x mic (6.3mm), 1 x line (2 x RCA), 1 x aux (3.5mm)
Line output2 x RCA (mono)
Speaker outputsScrew terminals - 100V / 8 Ohms / Com
DC power24Vdc screw terminals
Mute24V relay contacts
THD<0.4% @ 1kHz
Input impedance1k Ohms (mic/line)
Input sensitivity-10dB (line), -45dB (mic)
SNR80dB (line), 75dB (mic)
Frequency response100Hz - 18kHz
Model - WSP25-W
EAN - 5015972126042

Weatherproof sound projectors with injection-moulded body and coated steel grille. Suitable for indoor or outdoor music and speech applications. Fitted with 350mm four core input cable for different power ratings. The transformer may be bypassed internally to give an 8 Ohms, 25W load.

Adjustable steel mounting bracket --- Weatherproof ABS enclosure
Woofer165mmØ (6.5") reinforced cone
IP ratingIPX5
Frequency response100Hz - 17kHz
Power25W @ 8 ohms
SPL @ 1W/1m92dB
Tappings100v line - 5W, 10W, 20W
Dimensions245 x 177mmØ
TweeterConcentric 25mm (1") mylar dome
Housing materialABS
Cable : length350mm
RECOMMENDED SPEAKER CABLE - Click on red order code to veiw

807.057 (white) and 807.058 (black) Figure 8 Speaker Cable - 2 x (42 x 0.2mm 1.32mm²) 15A - This cable will allow 240W to travel 175M without any loss

807.090 and 807.095 Hi Flex Double Insulated 0.75mm² 6A Speaker Cable - 2 x (12 x 0.2mm² Cu + 12 x 0.2mm² CCA) 6A Black - This cable will allow 240W to travel 100M without any loss

801.817 and 801.818 Double Insulated 1.15mm² Speaker Cable - 2 x (25 x 0.18mm² Cu + 20 x 0.18mm² CCA) 15A Black - This cable will allow 240W to travel 150M without any loss

801.878 and 801.879 Double Insulated 2.01mm² Speaker Cable - 2 x (40 x 0.18mm² Cu + 39 x 0.18mm² CCA) 25A Black - This cable will allow 240W to travel 250M without any loss

For most installations 807.057 or 807.058 is sufficient, giving the best quality cable for the price. However, if you are running the cable anywhere where it is not secure or where it can be touched by someone, then use the double insulated cable

Copyright © 1997 - 2022     Adastra PA     Providing dependable Online Sales for over 25 years     Web design by JaiWeb Services