| | 60W rms Horn Public Address System 15W rms 10 x 6" Speakers | | |
| |
Order Code 953.176UK
EAN Barcode 5015972213230
Model Number UM60
| | |
|
| | |
| |
Order Code 952.099UK
EAN Barcode 5015972177778
Model Number RH15V | | |
|
| | |
| | PUT TOGETHER YOUR PERFECT SYSTEM
Just add cable (see bottom of this page) and these packages provide everything you need for a complete, EASY FIT install
The amplifier will take different input sources which can include microphones, CDs, radios, phones and mp3 players
On the front of the amplifier there is a Bluetooth media player. You have the option of plugging in a flash drive or SD card containing your mp3 music files or switching to FM radio
Adastra manufacture professional Public Address systems using 100-Volt Line technology. With 100-Volt Line there is no need to balance speaker impedances to match the amplifier. No complicated calculations! No risk of overloading or blowing up the amplifier!
You simply wire the first speaker (COM and 100V terminals) to the amplifier (COM and 100V terminals) and then take the wire on to the next speaker until all are connected. Plug in to the mains and you are ready to go |
| | |
| | 60W RMS 3-CHANNEL 100V LINE MIXER AMPLIFIER Model - UM60 EAN - 5015972213230
100V mixer-amplifiers with USB audio player, FM tuner and BT wireless receiver in an ultra compact housing. Microphone input, line input and USB/FM/BT sections are governed by front panel volume controls and a master volume. Mono output to either 100V line or 8 Ohms speaker load is connected via screw terminals on the rear panel. Supplied with hardware for mounting 2 units side by side in a 1U 19" rack space. Designed as a versatile solution for small to medium PA installations.
Ultra compact form factor --- Efficient class D amplifier design --- Internal USB/FM/BT audio player --- 100V line or 8 Ohms operation |
| | |
| | Output power : rms | 60W | Alarm output | Fog, siren & alert generator |
---|
Weight | 2.47kg |
---|
Dimensions | 269 x 210 x 44mm |
---|
Power supply | 170-264Vac, 50Hz (IEC) or 24Vdc |
---|
Amplifier : construction | Class D + transformer output |
---|
Audio source | Internal USB/FM/BT player |
---|
Inputs | 1 x mic (6.3mm), 1 x line (2 x RCA), 1 x aux (3.5mm) |
---|
Line output | 2 x RCA (mono) |
---|
Speaker outputs | Screw terminals - 100V / 8 Ohms / Com |
---|
DC power | 24Vdc screw terminals |
---|
Mute | 24V relay contacts |
---|
THD | <0.4% @ 1kHz |
---|
Input impedance | 1k Ohms (mic/line) |
---|
Input sensitivity | -10dB (line), -45dB (mic) |
---|
SNR | 80dB (line), 75dB (mic) |
---|
Frequency response | 100Hz - 18kHz |
---|
| |
| | 10 x 6" 15W RMS OUTDOOR HORN SPEAKERS Model - RH15V EAN - 5015972177778
PA horn speakers with 100V transformer offering several different power settings. The housing is moulded from high impact ABS material to offer maximum protection against physical or weather damage. Reflex loading and a rectangular flared aperture ensures efficient and directed sound delivery over large areas.
Durable and weatherproof --- Rotary 100V tapping switch |
| | |
| | 100V line tappings | 2.5 / 5 / 10 / 15W | Impedance | 4k / 2k / 1k / 670 Ohms |
---|
SPL @ 1W/1m | 106dB |
---|
SPL @ rated power | 118dB |
---|
Dimensions | 312 x 255 x 152mm |
---|
Weight | 1.48kg |
---|
Power rms | 15W |
---|
Power max. | 23W |
---|
Frequency response | 275Hz - 7kHz (±3dB) |
---|
IP rating | IP66 |
---|
| |
| | RECOMMENDED SPEAKER CABLE - Click on red order code to veiw
807.057 (white) and 807.058 (black) Figure 8 Speaker Cable - 2 x (42 x 0.2mm 1.32mm²) 15A - This cable will allow 240W to travel 175M without any loss
807.090 and 807.095 Hi Flex Double Insulated 0.75mm² 6A Speaker Cable - 2 x (12 x 0.2mm² Cu + 12 x 0.2mm² CCA) 6A Black - This cable will allow 240W to travel 100M without any loss
801.817 and 801.818 Double Insulated 1.15mm² Speaker Cable - 2 x (25 x 0.18mm² Cu + 20 x 0.18mm² CCA) 15A Black - This cable will allow 240W to travel 150M without any loss
801.878 and 801.879 Double Insulated 2.01mm² Speaker Cable - 2 x (40 x 0.18mm² Cu + 39 x 0.18mm² CCA) 25A Black - This cable will allow 240W to travel 250M without any loss
For most installations 807.057 or 807.058 is sufficient, giving the best quality cable for the price. However, if you are running the cable anywhere where it is not secure or where it can be touched by someone, then use the double insulated cable |
| | |
| Copyright © 1997 - 2024 Adastra PA | |
|
|
|