 | | | 2 x 120W rms Indoor Music PA System
30W rms 6.5" Pendant Speaker | | |
| | | 
Order Code
953.163UK
EAN Barcode
5015972194645
Model Number
RM1202
 |  | |
|
| | |
| | |
Order Code
952.429UK
EAN Barcode
5015972071526
Model Number
PS65-W
|  | |
|
| | |
| | | PUT TOGETHER YOUR PERFECT SYSTEM
Just add cable (see bottom of this page) and these packages provide everything you need for a complete, EASY FIT install
The amplifier will take different input sources which can include microphones, CDs, radios, phones and mp3 players
On the front of the amplifier there is a Bluetooth media player. You have the option of plugging in a flash drive or SD card containing your mp3 music files or switching to FM radio
Adastra manufacture professional Public Address systems using 100-Volt Line technology. With 100-Volt Line there is no need to balance speaker impedances to match the amplifier. No complicated calculations! No risk of overloading or blowing up the amplifier!
You simply wire the first speaker (COM and 100V terminals) to the amplifier (COM and 100V terminals) and then take the wire on to the next speaker until all are connected. Plug in to the mains and you are ready to go |
| | |
| | | 2 x 120W RMS 5-CHANNEL 100V LINE MIXER AMPLIFIER
Model - RM1202
EAN - 5015972194645
Mixer-amplifier with 2 separate 120W outputs to 100V or 4/8 Ohms speakers. Inputs for mic, 2 x mic/line and 2 line inputs with an integral USB/SD/FM player and Bluetooth receiver can be enabled independently to either of the 2 zones. Mic 1 channel has a variable override and switchable phantom power for use with condenser microphones. Designed for installations where independent paging and audio to 2 separate zones is needed.
Can be configured as a stereo 100V amplifier --- Integral USB/SD/FM audio player --- Internal Bluetooth receiver --- 100V or 4/8 Ohms operation --- 5 input channels --- Switchable +20V phantom power --- Switchable priority for channel 1 |
| | |
| | | | Power supply | 110-230Vac, 50/60Hz (IEC) |
|---|
| Power : output | 2 x 120W rms |
|---|
| Audio source | USB/SD/FM/BT audio player |
|---|
| Inputs | 1 x mic (XLR), 2 x mic/line (jack), 2 x line (twin RCA) |
|---|
| Zone outputs: line | 2 x RCA |
|---|
| Zone outputs: speaker | 2 x terminal outputs 100V/8 Ohms/4 Ohms/com |
|---|
| Phantom power | +20V switchable to Mic.1 XLR |
|---|
| THD | <0.76% @ 1kHz |
|---|
| Input impedance | 1k Ohms (mic/line) |
|---|
| SNR | 84dB (line), 82dB (mic) |
|---|
| Bluetooth version | 2.1 |
|---|
| Input sensitivity | -11dB (line), -46dB (mic) |
|---|
| Frequency response | 100Hz - 20kHz |
|---|
| Dimensions | 483 x 320 x 88mm |
|---|
| Weight | 11.24kg |
|---|
| | |
| | | 6.5" 30W RMS PENDANT CEILING SPEAKERS
Model - PS65-W
EAN - 5015972071526
Wide dispersion spheroid 2-way pendant speakers for use with high ceilings where regular ceiling speakers would be positioned too high to be efficient. Each has a rotary switch on top for selecting 100V line tappings and 8 ohms operation.
Supplied with 4.5m cable and cable hook for hanging --- Selector for 4 x 100V line tappings + 8 ohms |
| | |
| | | | Colour | White |
|---|
| Speaker size | 165mm (6.5") |
|---|
| Tappings | 30W, 15W, 7.5W, 3.75W + 8 Ohms |
|---|
| Rated power at 8 Ohms | 30W |
|---|
| Sensitivity | 88dB |
|---|
| Frequency response | 40Hz - 20kHz |
|---|
| Dispersion angle | 140° |
|---|
| Dimensions | 195 x 270mmØ |
|---|
| Weight | 2.916kg |
|---|
| Impedance : 100V | 333, 666, 1.3k, 2.6k Ohms |
|---|
|
|---|
| | |
| | | RECOMMENDED SPEAKER CABLE - Click on red order code to veiw
807.057 (white) and 807.058 (black) Figure 8 Speaker Cable - 2 x (42 x 0.2mm 1.32mm²) 15A - This cable will allow 240W to travel 175M without any loss
807.090 and 807.095 Hi Flex Double Insulated 0.75mm² 6A Speaker Cable - 2 x (12 x 0.2mm² Cu + 12 x 0.2mm² CCA) 6A Black - This cable will allow 240W to travel 100M without any loss
801.817 and 801.818 Double Insulated 1.15mm² Speaker Cable - 2 x (25 x 0.18mm² Cu + 20 x 0.18mm² CCA) 15A Black - This cable will allow 240W to travel 150M without any loss
801.878 and 801.879 Double Insulated 2.01mm² Speaker Cable - 2 x (40 x 0.18mm² Cu + 39 x 0.18mm² CCA) 25A Black - This cable will allow 240W to travel 250M without any loss
For most installations 807.057 or 807.058 is sufficient, giving the best quality cable for the price. However, if you are running the cable anywhere where it is not secure or where it can be touched by someone, then use the double insulated cable |
| | |
| | Copyright © 1997 - 2024 Adastra PA | |
 |