 | | | 6 x 40W rms Outdoor Music PA System
20W rms 6" White Speaker | | |
| | | 
Order Code
953.160UK
EAN Barcode
5015972211106
Model Number
RM406
 |  | |
|
| | |
| | |
Order Code
952.942UK
EAN Barcode
5015972126042
Model Number
WSP25-W |  | |
|
| | |
| | | PUT TOGETHER YOUR PERFECT SYSTEM
Just add cable (see bottom of this page) and these packages provide everything you need for a complete, EASY FIT install
The amplifier will take different input sources which can include microphones, CDs, radios, phones and mp3 players
On the front of the amplifier there is a Bluetooth media player. You have the option of plugging in a flash drive or SD card containing your mp3 music files or switching to FM radio
Adastra manufacture professional Public Address systems using 100-Volt Line technology. With 100-Volt Line there is no need to balance speaker impedances to match the amplifier. No complicated calculations! No risk of overloading or blowing up the amplifier!
You simply wire the first speaker (COM and 100V terminals) to the amplifier (COM and 100V terminals) and then take the wire on to the next speaker until all are connected. Plug in to the mains and you are ready to go |
| | |
| | | 240W RMS 5-CHANNEL 100V LINE 6-ZONE MIXER AMPLIFIER
Model - RM406
EAN - 5015972211106
Zone mixer-amplifier with 6 x 40W class D power section for 100V or 4/8 Ohms speakers. Each zone can be monitored from the front panel via a headphone output with volume control. 3 mic/line inputs, 1 aux input and an integral USB/SD/FM player with Bluetooth receiver can be matrix switched to any of the 6 zones independently. Mic 1 channel has a variable override and each microphone input has switchable phantom power. A master chime with volume can be used for paging calls and alerts. Designed for multi-room systems requiring different audio sources.
Integral USB/SD/FM audio player --- Internal Bluetooth receiver --- 100V or 4/8 Ohms operation --- 6 independent output zones --- 3 mic/line and 1 auxiliary input --- Mic priority and chime functions --- Switchable +20V phantom power --- 24V mute contacts --- Monitor headphones output |
| | |
| | | | Power supply | 170-264Vac, 50Hz (IEC) | | Power output | 6 x 40W rms |
|---|
| Audio source | USB/SD/FM/BT audio player |
|---|
| Amplifier : construction | Class D + transformer outputs |
|---|
| Inputs | 3 x mic/line (XLR/jack), auxiliary 2 x RCA |
|---|
| Zone outputs: line | 6 x RCA (mono) |
|---|
| Zone outputs: speaker | 6 x terminal outputs 100V / 8 Ohms / 4 Ohms / Com |
|---|
| Phantom power | +20V switchable to each XLR |
|---|
| Monitor outputs | 6.3mm stereo phones, 2 x RCA line |
|---|
| Mute | +24V relay contacts |
|---|
| THD | <0.76% @ 1kHz |
|---|
| Input impedance | 1k Ohms (mic/line) |
|---|
| Input sensitivity | -11dB (line), -46dB (mic) |
|---|
| SNR | 84dB (line), 82dB (mic) |
|---|
| Bluetooth version | 2.0 |
|---|
| Frequency response | 100Hz - 24kHz |
|---|
| Dimensions | 433 x 89 x 302mm |
|---|
| Weight | 11kg |
|---|
| |
| | | 6" 20W RMS OUTDOOR PROJECTOR WALL SPEAKERS
Model - WSP25-W
EAN - 5015972126042
Weatherproof sound projectors with injection-moulded body and coated steel grille. Suitable for indoor or outdoor music and speech applications. Fitted with 350mm four core input cable for different power ratings. The transformer may be bypassed internally to give an 8 Ohms, 25W load.
Adjustable steel mounting bracket --- Weatherproof ABS enclosure |
| | |
| | | | Colour | White | | Woofer | 165mmØ (6.5") reinforced cone |
|---|
| IP rating | IPX5 |
|---|
| Frequency response | 100Hz - 17kHz |
|---|
| Power | 25W @ 8 ohms |
|---|
| SPL @ 1W/1m | 92dB |
|---|
| Tappings | 100v line - 5W, 10W, 20W |
|---|
| Dimensions | 245 x 177mmØ |
|---|
| Weight | 2.02kg |
|---|
| Tweeter | Concentric 25mm (1") mylar dome |
|---|
| Housing material | ABS |
|---|
| Cable : length | 350mm |
|---|
| |
| | | RECOMMENDED SPEAKER CABLE - Click on red order code to veiw
807.057 (white) and 807.058 (black) Figure 8 Speaker Cable - 2 x (42 x 0.2mm 1.32mm²) 15A - This cable will allow 240W to travel 175M without any loss
807.090 and 807.095 Hi Flex Double Insulated 0.75mm² 6A Speaker Cable - 2 x (12 x 0.2mm² Cu + 12 x 0.2mm² CCA) 6A Black - This cable will allow 240W to travel 100M without any loss
801.817 and 801.818 Double Insulated 1.15mm² Speaker Cable - 2 x (25 x 0.18mm² Cu + 20 x 0.18mm² CCA) 15A Black - This cable will allow 240W to travel 150M without any loss
801.878 and 801.879 Double Insulated 2.01mm² Speaker Cable - 2 x (40 x 0.18mm² Cu + 39 x 0.18mm² CCA) 25A Black - This cable will allow 240W to travel 250M without any loss
For most installations 807.057 or 807.058 is sufficient, giving the best quality cable for the price. However, if you are running the cable anywhere where it is not secure or where it can be touched by someone, then use the double insulated cable |
| | |
| | Copyright © 1997 - 2024 Adastra PA | |
 |
|
|